|
INFO:
Chair with steel legs
Structure Ø18mm steel tube.
Shell single piece in polypropylene + fiberglass, 100% recyclable.
Foam cusion with different densities, glued using eco-friendly waterborne adhesive.
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or chrome finish, composition: 98.4% NI, 1.6% CR, 24.4 micron thickness and UNE EN ISO 2409-96 adhesion, Classification 0.
Glides in polypropylene.
Upholstery seat only, front upholstery or fully upholstered. See manufacturers' specifications for fabrics.
Chair with wooden legs
Structure eith 4 arms base in natural varnished or black stained oak wood. Fixed or swivel.
Shell single piece in polypropylene + fiberglass, 100% recyclable.
Foam cusion with different densities, glued using eco-friendly waterborne adhesive.
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct.
Glides polypropylene.
Upholstery seat only, front upholstery or fully upholstered. See manufacturers' specifications for fabrics.
Chair with castors
Structure with powder coated or polished aluminium 5 arms swivelling base with castors. Gas cylinder elevation.
Shell single piece in polypropylene + fiberglass, 100% recyclable.
Foam cusion with different densities, glued using eco-friendly waterborne adhesive.
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct.
Castors soft or hard.
Upholstery seat only, front upholstery or fully upholstered. See manufacturers' specifications for fabrics.
|
|
