GORKA CHAIR - FLERE TYPER BEN

GORKA CHAIR - FLERE TYPER BEN

Skriv en mail for ordre / yderligere information på info@furnbyox.dk

Gorka - En stol af højt design og ergonomi. Perfekt til kontraktmarkedet, kontoret og hjemmet. 

 

Gorka har været og er stadig essensen af brandet AKABA. Deres bestseller, designet af Jorge Pensi. 

En stol der er i stand til at skabe en atmosfære i alle slags interiør dekorations projekter. 

 

Stolen er en ideel model til projekter der kræver en ergonomisk stol af højt design. 

Klassisk og tidsløst design. 

 

Gorka leveres i flere versioner og med mulighed for at kombinere stolens farver, materialer og polster, så den passer ind i alle rum. 

 

 

Denne stol leveres også med polyamide sæde. Se HER

Gorka kan også fås som bænk. Se HER

VARIANTER


MÅL

 

TILBEHØR

 

FARVEKORT SÆDE

 

FARVEKORT STEL

 

FARVEKORT POLSTER

GRUPPE A

 

GRUPPE B

 

GRUPPE C/D

 

SPECIAL GABRIEL EDITION

 

LEATHER

 

 

INFO

GORKA WOOD

Stackable wooden chair with and without arms 
Side structures high-pressure die-cast aluminium. Quality: UNE L-2630. Injection pressure = 1,000 MT.
Shell 9-layer beech wood curved in high frequency hot press and aluminium mould. Surface treatment with fine 100 grade steel wool. Final coat of two-component polyurethane and catalyst with UV and non-yellowing filter. Discontinuous thickness 10-11mm.  
Foam cushion 35 kg/m3 density and 10mm thickness; glued using eco-friendly waterborne adhesive.
Glides polyamide 6 + 35% fiberglass.    
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or polished.
Finishes stained with matt acrylic varnish with UV filter available in different options.
Upholstery see manufacturers' specifications.


GORKA XL

Stackable wooden chair with and without arms 
Side structures high-pressure die-cast aluminium. Calidad: UNE L-2630. Injection pressure = 1,000 MT
Shell 9-layer beech wood curved in high frequency hot press and aluminium mould. Surface treatment with fine 100 grade manual nylon roller brush. Final coat of two-component polyurethane and catalyst with UV and non-yellowing filter. Discontinuous thickness 10-11mm.  
Foam cushion with 35 kg/m3 density and 10mm thickness; glued using eco-friendly waterborne adhesive.
Glides polyamide 6 + 35% fiberglass.
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or polished.
Finishes stained with matt acrylic varnish with UV filter available in different options.
Upholstery see manufacturers' specifications.

 

ENVIRONMENTAL CERTIFICATES

ANSI/BIFMA X5.1:2011
UNE EN 11010 Resistencia, durabilidad y seguridad. Strenght, durability and safety. Résistance, durabilité et sécurité.
BS 4872.1-85 BS4875.2-85  Resistencia, durabilidad y seguridad. Strenght, durability and safety. Résistance, durabilité et sécurité.
ISO 14006  Ecodesign.
EPD (Declaración medioambiental de producto, Environmental product declaration).

Recyclable up to 100 %.